TM 5-3805-291-23-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0176 00
INSPECTION - CONTINUED
Bore Runout (Radial Eccentricity) - Continued
N OT E
Write measurements for dial indicator with correct notations. This notation is necessary for making calcu-
lations in chart correctly.
5.
Divide measurements from step 4 by two. Write this number on line 1 in columns (B and D) of chart.
6.
Turn flywheel to put dial indicator at position (A).
7.
Adjust dial indicator to 0.00 in. (0.0 mm).
8.
Turn flywheel counterclockwise to put dial indicator at position (B).
9.
Write measurements on line 2 under B in chart.
10.
Turn flywheel counterclockwise to put to dial indicator at position (C).
11.
Write measurement on line 2 under C in chart.
12.
Turn flywheel counterclockwise to put to dial indicator at position (D).
13.
Write measurement on line 2 under D in chart.
14.
Total each column. Write result of column C on line 3.
15.
Subtract smaller number from larger number in column B and column D of chart.
16.
Write result of step 15 on line 3. Result is horizontal eccentricity (out of round). Line 3 in column C is vertical eccentric-
ity.
427-C0563
0176 00-5
