TM 5-3805-291-23-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0176 00
INSPECTION - CONTINUED
Bore Runout (Radial Eccentricity) - Continued
17.
Find intersection of eccentricity lines (vertical and horizontal) in illustration below.
18.
If point of intersection is in "Acceptable" range, bore
is in alignment. If point of intersection is in "Not
Acceptable" range, flywheel housing must be
changed.
(1)
Total vertical eccentricity.
(2)
Total horizontal eccentricity.
(3)
Acceptable value.
(4)
Unacceptable value.
427-C0564
19.
Install flywheel (WP 0177 00).
20.
Install starter (WP 0051 00)
21.
Install engine (WP 0171 00).
22.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
23.
Inspect for flywheel interference.
24.
Shut down engine (TM 5-3805-291-10).
END OF WORK PACKAGE
0176 00-6