TM 5-3805-291-23-2
MAIN HYDRAULIC CONTROL VALVE REPLACEMENT - CONTINUED
0218 00
MAIN HYDRAULIC CONTROL VALVE INSTALLATION
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Main hydraulic control valve weighs 525 lb (238 kg).
Apply a thin coat of clean oil to all O-rings before installation.
1.
Attach link bracket to main hydraulic control valve (20).
2.
Attach lever puller hoist to link bracket and tilt cylin-
der (39).
427-C1112
0218 00-9
