TM 5-3805-292-10
0013
OPERATION
00013
CAUTION
Auger with extension cannot point straight down. Drill down at an angle. Failure to follow
this caution may cause damage to equipment.
1. Position auger height by moving right-hand RH (loader) control lever (Figure 2, Item 1) forward or backward.
2. Position auger angle by moving RH (loader) control lever (Figure 2, Item 1) left or right.
1
458-0309
Figure 2. Positioning Work Tool with RH (Loader) Control Lever.
0013
3. Actuate auger clockwise by pressing down on right side of auxiliary hydraulic foot pedal (Figure 3, Item 1).
Actuate auger counterclockwise by pressing down on left side of hydraulic foot pedal.
4. Before digging, determine proper RPM. Use slower RPM on hard ground. Control auger speed with foot
throttle.
1
458-0062
Figure 3. Auxiliary Hydraulic Foot Pedal.
0013
