TM 5-3805-292-10
0012
OPERATION CONTINUED
WARNING
Do not use locking function for work tools. Locking function times out after 60 seconds
with operator in seat. Failure to follow this warning may result in injury or death to
personnel.
3. Actuate hydraulic hammer by pressing down on right side of auxiliary hydraulic foot pedal (Figure 6, Item 1).
1
458-0062
Figure 6. Positioning Work Tool with RH (Loader) Control Lever.
0012
END OF TASK
REMOVAL
0012
1. Stop engine (WP 0005).
2. Using hammer and pin punch (Figure 7, Item 2), remove roll pin (Figure 7, Item 3) from housing (Figure 7, Item
1).
2
1
458-0308
3
Figure 7. Pin Punch and Roll Pin.
0012
