TM 5-3805-292-10
0020
Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
36
Switches, Fuel a. Monitor switches for proper
During
operation. Monitor fuel supply
Gauge, and
as indicated by fuel gauge.
Warning Light
Indicators
Warning light indicates an
b. Monitor all warning light
abnormal condition
indicators to ensure machine
requiring engine shutdown
systems are operating within
normal range.
OPERATOR
STATION
37
After
Cab Interior
a. Park machine on level ground
with loader arms fully lowered to
the ground and engine stopped/
parking brake engaged (WP
b. While exiting cab, remove all
trash that may have
accumulated inside cab.
Remove any dirt or debris from
around foot controls.
FRONT AND
LEFT SIDE
38
After
Cleaning
a. As required, clean SSL after
operation by hosing machine
Machine
down with water. This will
ensure cab windows are kept
clean to provide good operator
visibility for the next mission.
Keeping machine clean also
assists in a thorough After
operation inspection.
b. M400T ONLY. Remove all
buildup of dirt and debris from
final drive, sprocket, front and
rear idler wheels, rollers, and
tracks.
