TM 5-3805-292-10
0020
Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
SERVICE
41
After
Coupler and
a. Inspect coupler for cracks,
Cracks or breaks are
evident. Wear that would
Work Tool
breaks, or wear.
impair security of coupling
Attachment
is evident.
b. If work tool attachment is
Locking levers do not lock.
installed, ensure two locking
levers are in horizontal locked
position.
c. If work tool attachment is not
Locking levers do not lock.
installed, ensure two locking
levers can be turned to
horizontal locked position and
latch pins fully extend.
d. Ensure dirt and obstructions are
removed from locking levers
and mating surface of coupler
and work tool attachment.
LOCKING LEVERS IN
458-0011
HORIZONTAL LOCKED POSITION
Figure 30. Manual Locking Levers.
0020
42
After
Auxiliary
Inspect two quick disconnect hose Class III leaks are evident.
Hydraulic Hose couplers for looseness, damage, or Damage that would impair
leaks.
operation is evident.
43
a. Inspect windshield wiper/washer Any damage is evident.
After
Cab Front
Door and Step
for damage. Inspect condition of
wiper blade. Obtain replacement
wiper blade if worn.
