TM 5-3805-292-10
0020
Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
45
After
M400W: Left-
a. Check for loose or missing axle Any axle mounting
hardware is loose or
Side Axles,
mounting hardware.
missing.
Chain Tank,
Wheels and
Class III oil leaks are
b. Check for oil leaks from chain
Tires
evident.
tank.
CHAIN TANK
AXLE MOUNTING
BOLTS
458-0013
Figure 32. Axle Mounting Bolts and Chain Tank (M400W).
0020
NOTE
If machine is new or a new wheel and tire assembly has just been installed, wheel lug nuts should be
checked by Field Maintenance every 10 hours until nuts remain at torque. Torque is 100 to 120 lb-ft (135 to
163 Nm).
Two or more lug nuts are
c. Check for loose or missing
missing.
wheel lug nuts. Notify Field
Maintenance if any are loose or
missing.
d. Inspect tires and rims for
Damage to tire and/or rim
that would lead to tire
damage. Check tire tread and
failure is evident.
sidewall for cuts and foreign
material in treads. Remove any
foreign material lodged in tire
tread.
e. Examine rolling radius of tires
Tire is flat.
for an indication of tire inflation.
f. Ensure valve stems and caps
are present and in good
condition.
