TM 5-3805-292-10
0020
Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
56
After
0.1
Hydraulic
Reservoir
WARNING
Contact with engine/hydraulic oil can damage skin. Wear gloves when handling engine/hydraulic oil. If oil
contacts skin, wash it off immediately. Failure to follow this warning may result in injury to personnel.
a. Visually check for damage or oil Class III oil leaks are
evident.
leaks.
b. Perform check of hydraulic
reservoir oil level. Correct oil
level, with loader arms lowered
to the ground, is at midpoint of
sight gauge.
c. If oil is not visible in sight gauge, If oil is not visible in sight
add oil until visible at midpoint in gauge.
sight gauge.
CAUTION
When servicing hydraulic reservoir, clean filler cap and area around filler cap to help reduce the risk of
hydraulic system contamination. Failure to follow this caution may result in damage to equipment.
1. Check that cap is present.
Hydraulic filler cap is
missing.
2. Clean filler cap and area
around filler cap with a rag.
3. Slowly turn filler cap
counterclockwise (left) until
pressure is relieved, then
remove filler cap.
4. Add oil through filler opening
until oil level is visible at
midpoint in sight gauge.
Refer to LO 5-3805-292-13
for correct grade of oil for
expected temperature range.
