TM 5-3805-292-10
0020
Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
SERVICE
After
0.1
Engine Oil
c. Wipe dipstick clean, then
57
(Cont)
Level
reinsert into dipstick tube until
fully seated. Remove dipstick
and take reading. Level must be
within cross-hatched area
(between add and full marks) at
end of dipstick.
CROSS-HATCHED AREA
FULL MARK
ADD MARK
458-0023
Figure 42. Dipstick Markings.
0020
d. If level is low, clean engine oil
filler cap with a rag, then turn
fully counterclockwise (left) to
remove. Add oil through filler
tube opening until level on
dipstick is correct. Refer to LO
5-3805-292-13 for correct grade
of oil for expected temperature
range.
e. Install filler cap and turn fully
clockwise (right) until tight.
ENGINE OIL FILLER CAP
458-0032
Figure 43. Engine Oil Filler Cap.
0020
