TM 5-3805-292-23
0071
REMOVAL
00071
N OT E
Tag hoses, lines, and wires to aid in installation.
Note location and orientation offittings to aid in installation.
1. Remove LH access cover (Figure 1, Item 1). Refer to TM 5-3805-292-10.
2. Remove bolt (Figure 1, Item 2), two washers (Figure 1, Item 3), and nut (Figure 1, Item 4).
Figure 1. LH Access Cover.
0071
3. Tilt ROPS (WP 0134).
4. Remove filter element (Figure 2, Item 13) from head (Figure 2, Item 14).
5. Remove nut (Figure 2, Item 18), washer (Figure 2, Item 19), and wire (Figure 2, Item 15) from indicator assem-
bly (Figure 2, Item 16).
6. Remove hose (Figure 2, Item 9) from fitting (Figure 2, Item 10).
7. Remove line (Figure 2, Item 12) and fitting (Figure 2, Item 11) from fitting (Figure 2, Item 10).
8. Remove hose (Figure 2, Item 20) from fitting (Figure 2, Item 1).
9. Remove sender (Figure 2, Item 16) and O-ring (Figure 2, Item 17) from head (Figure 2, Item 14). Discard O-
ring.
10. Remove two bolts (Figure 2, Item 3), washers (Figure 2, Item 4), clamp and head (Figure 2, Item 14) from
bracket (Figure 2, Item 6).
11. Remove nut (Figure 2, Item 7), two washers (Figure 2, Item 8), bracket (Figure 2, Item 6), and bolt (Figure 2,
Item 5) from machine.
12. Remove two fittings (Figure 2, Items 1 and 10) and O-rings (Figure 2, Item 2) from head (Figure 2, Item 14).
Discard O-rings.