TM 5-3805-292-23
0076
REMOVAL
00076
N OT E
Tag and cap all hydraulic lines and fittings.
1. Disconnect and remove four hydraulic lines (Figure 1, Item 6) and fittings (Figure 1, Item 5).
2. Remove two O-rings (Figure 1, Item 7) from hydraulic drive motor (Figure 1, Item 1). Discard O-rings.
WARN I N G
Use assistance when lifting heavy parts. Failure to follow this warning may result in injury
to personnel.
N OT E
Note orientation of hydraulic drive motor before removal. Drive motor weighs 160 lb
(73 kg).
3. With assistance, attach lifting device and remove 12 bolts (Figure 1, Item 3), washers (Figure 1, Item 2),
hydraulic drive motor (Figure 1, Item 1), and spacer (Figure 1, Item 4) from machine.
4. Place hydraulic drive motor (Figure 1, Item 1) on flat surface.
Figure 1. Hydraulic Drive Motor.
0076
END OF TASK
CLEANING AND INSPECTION
00076
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK