TM 5-3805-292-23
0077
REMOVAL
00077
1. Park machine on level ground with final drive motor (Figure 1, Item 2) in drain position as shown.
WARN I N G
Oil is hot at operating temperature. Allow oil to cool before service. Failure to follow this
warning may result in injury to personnel.
2. Use a container to catch oil.
WARN I N G
When servicing this equipment, performing maintenance, or disposing of materials such
as engine/hydraulic oils, coolant, and fuel, consult your unit/local hazardous waste
disposal center or safety office for local regulatory guidance.
Engine/hydraulic oils, coolant, and fuel can be very slippery. Immediately wipe up any
spills.
Failure to follow these warnings ma result in injury to personnel.
y
3. Remove vent plug (Figure 1, Item 1) from final drive motor (Figure 1, Item 2).
4. Remove drain plug (Figure 1, Item 3) from final drive motor (Figure 1, Item 2) and drain oil.
Figure 1. Drain Position.
0077
END OF TASK
CLEANING AND INSPECTION
00077
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
