TM 5-3805-292-23
0086
WARN I N G
When servicing this machine, performing maintenance, or disposing of hazardous
materials, consult your unit/local hazardous waste disposal center or safety office for local
regulatory guidance. If further information is needed, please contact The Army
Environmental Hotline at 1-800-872-3845.
DO NOT disconnect or remove any hydraulic sysem lines or fitting unless engine is shut
t
down and hydraulic system pressure has been relieved. Tighten all connections before
applying pressure. Escaping hydraulic fluid under pressure can penetrate the skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings may result in injury or death to personnel.
N OT E
Use a container to catch any fluid that maydrain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
REMOVAL
00086
1. Attach lifting device to loader arms.
2. Remove two hose clamps (Figure 1, Item 1) and lift cylinder cover (Figure 1, Item 2) from machine.
Figure 1. Lift Cylinder Cover.
0086