TM 5-3805-292-23
0089
CLEANING AND INSPECTION
00089
Clean, inspect, and flush hydraulic system IAW General Maintenance Instructions (WP 0172).
END OF TASK
ASSEMBLY
00089
N OT E
Install components as noted during removal.
Tighten bolts equally.
1. Lubricate three new O-rings (Figure 7, Item 15) with clean hydraulic oil and install O-rings and plugs (Figure 7,
Item 14) on main hydraulic valve (Figure 7, Item 9).
2. Lubricate plunger (Figure 7, Item 10) with clean hydraulic oil and install plunger, spring (Figure 7, Item 11), new
O-ring (Figure 7, Item 12), and plug (Figure 7, Item 13) on main hydraulic valve (Figure 7, Item 9).
3. Lubricate four new O-rings (Figure 7, Item 8) with clean hydraulic oil and install O-rings and valves (Figure 7,
Item 7) on main hydraulic valve (Figure 7, Item 9).
4. Lubricate two new O-rings (Figure 7, Item 2) with clean hydraulic oil and install O-rings and plugs (Figure 7,
Item 1) on main hydraulic valve (Figure 7, Item 9).
5. Lubricate three plungers (Figure 7, Item 6) with clean hydraulic oil and install plungers, springs (Figure 7, Item
5), new O-rings (Figure 7, Item 4), and plugs (Figure 7, Item 3) on main hydraulic valve (Figure 7, Item 9).
0089-9