TM 5-3805-292-23
0089
ASSEMBLY CONTINUED
16. Lubricate new O-ring (Figure 10, Item 7) with clean hydraulic oil and install O-ring, spacer (Figure 10, Item 6),
plunger (Figure 10, Item 4), spring (Figure 10, Item 3), new O-ring (Figure 10, Item 5), cap (Figure 10, Item 2),
and two bolts (Figure 10, Item 1) on main hydraulic valve (Figure 10, Item 8).
WARN I N G
Springs may have significant tension. Use extreme caution when installing springs.
Springs under tension can act as projectiles when released. Failure to follow this warning
may result in injury to personnel.
17. Lubricate plunger (Figure 10, Item 17) with clean hydraulic oil and install plunger, spring (Figure 10, Item 16),
plunger (Figure 10, Item 15), spring (Figure 10, Item 9), new O-ring (Figure 10, Item 10), new O-ring (Figure
10, Item 12), plug (Figure 10, Item 11), cap (Figure 10, Item 13), and two bolts (Figure 10, Item 14) on main
hydraulic valve (Figure 10, Item 8).
Figure 10. Loader Spool.
0089
