TM 5-3805-292-23
0089
DISASSEMBLY CONTINUED
WARN I N G
Springs may have significant tension. Use extreme caution when removing springs.
Springs under tension can act as projectiles when released. Failure to follow this warning
may result in injury to personnel.
3. Remove two bolts (Figure 4, Item 14), cap (Figure 4, Item 13), plug (Figure 4, Item 11), O-ring (Figure 4, Item
12), O-ring (Figure 4, Item 10), spring (Figure 4, Item 9), plunger (Figure 4, Item 15), spring (Figure 4, Item 16),
and plunger (Figure 4, Item 17) from main hydraulic valve (Figure 4, Item 8). Discard O-rings.
4. Remove two bolts (Figure 4, Item 1), cap (Figure 4, Item 2), O-ring (Figure 4, Item 5), plunger (Figure 4, Item
4), spring (Figure 4, Item 3), spacer (Figure 4, Item 6), and O-ring (Figure 4, Item 7) from main hydraulic valve
(Figure 4, Item 8). Discard O-rings.
5. Remove loader spool (Figure 4, Item 18) from main hydraulic valve (Figure 4, Item 8).
6. Remove seal (Figure 4, Item 19) from loader spool (Figure 4, Item 18). Discard seal.
Figure 4. Loader Spool.
0089