2
TM 5-3805-292-23
OPERATOR MAINTENANCE
-
RAISING LOADER ARMS WITH ENGINE STOPPED AND NO ELECTRICAL POWER
009
0
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's (WP 0178, Item
TM 5-3805-292-10
0
33)
0
Equipment Conditions
0
Lifting Device, 1,500-lb Capacity
0
Machine parked on level ground (TM 5-3805-
Drain Pan
0
292-10)
0
Materials/Parts
0
Estimated Time to Complete
0
Oil, Lubricating, OE/HDO-15/40 (WP 0179,
0.5 Hr
Item 17)
0
0
Rag, Wiping (WP 0179, Item 19)
0
0
Tag, Marker (WP 0179, Item 30)
0
0
WARN I N G
Use extreme caution when lifting heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting equipment used is on solid footing, is in good
condition, and has suitable lifting capacity. Keep clear of heavy parts supported only by
lifting equipment.
Unauthorized personnel are not allowed in the hoisting area. Permit only personnel
engaged in hoisting operation to be near skid steer loader and lifting equipment. Failure to
follow this warning may result in death or injury to personnel.
Hoist the skid steer loader slowly and smoothly. Do not swing load from side to side, as
this may place extra strain on lifting components. Watch boom angle and overhead
clearance when hoisting.
Failure to follow these warnin s may result in injury or death to personnel or damage to
g
equipment.
WARN I N G
When servicing this equipment, performing maintenance, or disposing of materials such
as engine/hydraulic oil, engine coolant, fuel, battery acids, batteries, windshield cleaning
compound, and CARC paint, consult your unit/local hazardous waste disposal center or
safety office for local regulatory guidance.
Engine/hydraulic oils, coolant, and fuel can be very slippery. Immediately wipe up any
spills.
Failure to follow these warnings ma result in injury to personnel.
y
0090-1
