TM 5-3805-292-23
0099
INSTALLATION CONTINUED
8. Install three bolts (Figure 9, Item 1) on plate (Figure 9, Item 2).
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in well ventilated area away from open flame. If ingested, keep
individual calm and see medical attention. DO NOT induce vomiting. If contact with skin or
eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury or death to personnel.
9. Apply sealing compound (Figure 9, Item 3) to plate (Figure 9, Item 2) and cab interior mating surface.
Figure 9. Heat Shield Plate (Cab Interior).
0099