TM 5-3805-292-23
0100
REMOVAL
000100
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and
hoses and plug openings after removing lines. Contamination of system could result in
premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that ma drain from hoses or system. Dispose of fluids
y
IAW local policy and ordinances. Ensure all spills are cleaned up.
Note location of where tiedown straps are re oved and replace them during installation
m
with new tiedown straps.
1. Release clamp (Figure 1, Item 1) and disconnect hose (Figure 1, Item 3) from fitting (Figure 1, Item 2).
2. Remove fitting (Figure 1, Item 2) from engine.
Figure 1. Heater Hose Return.
0100
