TM 5-3805-292-23
0131
WARN I N G
Support condenser with wire so it does not hang from hoses. Damage to hoses or fins can
result in refrigerant leaks. Wear suitable eye protection. Failure to follow this warning may
result in injury to personnel or damage to equipment.
REMOVAL
000131
1. Lift engine compartment hood (Figure 1, Item 1) and remove bolt (Figure 1, Item 5), washer (Figure 1, Item 6),
spacer (Figure 1, Item 7), nut (Figure 1, Item 8), two clamps (Figure 1, Item 4), and nut (Figure 1, Item 9) from
engine compartment hood.
2. Remove A/C condenser (Figure 1, Item 3) (WP 0091).
3. Remove exhaust pipe (Figure 1, Item 2) (WP 0132).
4. Remove clip (Figure 1, Item 11) from support lift (Figure 1, Item 12).
5. Remove support lift (Figure 1, Item 12) from engine compartment hood (Figure 1, Item 1).
6. Remove two retaining rings (Figure 1, Item 15) from rod (Figure 1, Item 10).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may result in death or injury to
personnel.
N OT E
Component weighs approximately 50 lbs.
7. With assistance supporting hood, slide rod (Figure 1, Item 10), two spacer sleeves (Figure 1, Item 13), and
washers (Figure 1, Item 14) from engine compartment hood (Figure 1, Item 1) through holes in frame.
0131-2
