4
TM 5-3805-292-23
FIELD MAINTENANCE
-
A/C CONDENSER REPLACEMENT
0091
REMOVAL, CLEANING AND INSPECTION, INSTALLATION
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
0
0
Tool Kit, General Mechanic's (WP 0178, Item
Refrigerant, R-134a (WP 0179, Item 20)
0
33)
O-Ring (2)
0
0
Reclaimer, Refrigerant R-134a (WP 0178,
References
Item 28)
0
0
TM 5-3805-292-23P, Figure 68
Tool Kit, Service Refrigeration Ordnance (WP
0
0178, Item 34)
0
Equipment Conditions
0
Materials/Parts
Parking brake engaged (TM 5-3805-292-10)
0
0
Cap Set, Protective (WP 0179, Item 2)
Upper rear access door opened (TM 5-3805-
0
292-10)
Cleaning Compound, Solvent, Type III (WP
0
Refrigerant recovered from A/C system
0179, Item 3)
0
Oil, Lubricating, Refrigerant Compressor: Syn-
0
thetic Ester (WP 0179, Item 18)
0
Estimated Time to Complete
0
Rag, Wiping (WP 0179, Item 19)
0
2.7 Hr
0
0
WARN I N G
Contact with refrigerant can cause frostbite. Keep hands and face away to prevent
personal injury.
Protective face shield and gloves must always be worn when refrigerant lines are opened,
even if the gauges indicate system is empty.
Always use caution when disconnecting fititngs. Slowly loosen the fitting in a well-
ventilated area.
Do not smoke when servicing A/C or wherever refrigerant gas may be present.
Failure to follow these warnings may result in injury or death to personnel.
C AU T I O N
Cap all A/C hoses and fittings during removal to protect against contamination. Failure to
follow this caution may result in equipment damage.
0091-1