TM 5-3805-292-23
0145
REMOVAL CONTINUED
7. Remove nut (Figure 5, Item 8) and washer (Figure 5, Item 9) from bolt (Figure 5, Item 1).
8. Remove bolt (Figure 5, Item 1) and two spacers (Figure 5, Item 7) from bracket (Figure 5, Item 10).
9. Position support lift rod (Figure 5, Item 11) away from bracket (Figure 5, Item 10) to allow wiring harness
removal.
10. Remove round connector bezel (Figure 5, Item 2) from socket (Figure 5, Item 3).
11. Loosen bolt (Figure 5, Item 6) and remove rectangular connector (Figure 5, Item 4) from socket (Figure 5, Item
5).
Figure 5. Bulkhead Connectors.
0145
N OT E
Remove tiedown straps.
Tape connectors to cab wiring harness fo ease of removal from ROPS assembly.
r
12. Remove cab wiring harness (Figure 6, Item 2) from ROPS assembly by pulling RH leg of wiring harness (Fig-
ure 6, Item 1) out of channel in ROPS assembly.
