TM 5-3805-292-23
0160
REMOVAL
000160
N OT E
Tag wires prior to removal to aid in installation.
1. Position boot (Figure 1, Item 1) aside.
2. Remove nut (Figure 1, Item 2) and lockwasher (Figure 1, Item 3) from single-point power distribution block
(Figure 1, Item 4). Discard lockwasher.
3. Disconnect two wires (Figure 1, Item 7) from single-point power distribution block (Figure 1, Item 4).
4. Remove two bolts (Figure 1, Item 6), washers (Figure 1, Item 5), and single-point power distribution block (Fig-
ure 1, Item 4) from engine compartment.
Figure 1. Engine Compartment.
0160
END OF TASK
INSTALLATION
000160
1. Install single-point power distribution block (Figure 1, Item 4), two washers (Figure 1, Item 5), and bolts (Figure
1, Item 6) in engine compartment.
N OT E
Install wires as tagged during removal.
2. Connect two wires (Figure 1, Item 7) to single-point power distribution block (Figure 1, Item 4).
3. Install new lockwasher (Figure 1, Item 3) and nut (Figure 1, Item 2) on single-point power distribution block
(Figure 1, Item 4).
4. Reposition boot (Figure 1, Item 1) on single-point power distribution block (Figure 1, Item 4).
END OF TASK
FOLLOW-ON TASKS
000160
1. Connect battery power (WP 0142).
2. Close ROPS (WP 0134).
3. Verify correct operation of machine (TM 5-3805-292-10).
END OF TASK
END OF WORK PACKAGE
