TM 5-3805-298-23-1
0097
Table 1. 600 Hydraulic Oil Temperature Sensor Diagnostic Codes - Continued.
097
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 7. Test for Shorted Lower
600-3 Hydraulic Oil
Cab Wiring Harness.
Temperature Sensor Voltage
Is Above Normal or Shorted
1. Using digital multimeter
Continuity - Replace lower cab wiring
High - Continued
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C19
Proceed to Test Step 8.
(WP 0012, Figure 23) terminal 2
No Continuity - Proceed to step 2.
and all other C-C19 terminals.
2. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C12
Proceed to Test Step 8.
(WP 0012, Figure 26) terminal 30
No Continuity - Replace transmission
and all other C-C12 terminals.
ECM (WP 0266).
Proceed to Test Step 8.
Test Step 8. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install left engine access panel
(WP 0350).
3. Install transmission ECM cover
(WP 0266).
4. Install left and right lower cab
access panels (WP 0347).
5. Using MSD, check for active
Diagnostic Code 600-3 Hydraulic Oil
diagnostic codes (WP 0008).
Temperature Sensor Voltage Is
Above Normal Becomes Inactive -
Troubleshooting complete.
Diagnostic Code 600-3 Hydraulic Oil
Temperature Sensor Voltage Is
Above Normal Remains Active -
Repeat troubleshooting from the
beginning.
0097-5