TM 5-3805-298-23-2
0181
REMOVAL
000181
NOTE
Rear housing crankshaft seal assembly is not serviceable. If removed, it must be
replaced.
1. Remove eight bolts (Figure 1, Item 2) from rear housing crankshaft seal assembly (Figure 1, Item 1).
2. Remove four bolts (Figure 1, Item 3) from rear housing crankshaft seal assembly (Figure 1, Item 1).
3. Remove rear housing crankshaft seal assembly (Figure 1, Item 1) from engine block (Figure 1, Item 4). Discard
rear housing crankshaft seal assembly.
Figure 1. Rear Housing Crankshaft Seal Assembly and Retaining Hardware.
0181
END OF TASK
CLEANING AND INSPECTION
000181
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK