TM 5-3805-298-23-2
0181
INSTALLATION CONTINUED
6. Install six remaining bolts (Figure 3, Item 2) on rear housing crankshaft seal assembly (Figure 3, Item 1).
Tighten eight bolts to 16 lb-ft (22 Nm).
7. Install two remaining bolts (Figure 3, Item 3) on rear housing crankshaft seal assembly (Figure 3, Item 1).
Tighten four bolts to 16 lb-ft (22 Nm).
Figure 3. Rear Housing Crankshaft Seal Assembly and Retaining Hardware.
0181
END OF TASK
FOLLOW-ON TASKS
000181
1. Install flywheel housing (WP 0185).
2. Verify correct operation of machine (TM 5-3805-298-10).
END OF TASK
END OF WORK PACKAGE