TM 5-3805-298-23-4
0373
REMOVAL CONTINUED
NOTE
Note orientation and position of fittings to aid installation.
6. Remove three fittings (Figure 4, Item 3), and O-rings (Figure 4, Item 2) from combination tilt relief valve
(Figure 4, Item 1). Discard O-rings.
7. Loosen two jam nuts (Figure 4, Item 5), remove two test fittings (Figure 4, Item 6), and O-rings (Figure 4,
Item 4) from combination tilt relief valve (Figure 4, Item 1). Discard O-rings.
Figure 4. Combination Tilt Relief Valve.
0373
END OF TASK
CLEANING AND INSPECTION
000373
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
