TM 5-3805-298-23-4
0382
CLEANING AND INSPECTION
000382
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
INSTALLATION
000382
NOTE
Replacement ride control accumulators are not charged.
1. If replacing ride control accumulator (Figure 2, Item 3), charge with dry nitrogen (see procedures in this work
package) prior to installation.
2.
Install new O-ring (Figure 2, Item 2) on ride control accumulator (Figure 2, Item 3).
3. Install ride control accumulator (Figure 2, Item 3) on ride control valve (Figure 2, Item 1).
4. Install lower access panel (Figure 3, Item 3), four washers (Figure 3, Item 2), and bolts (Figure 3, Item 1) on
machine.
Figure 3. Lower Access Panel.
0382
END OF TASK