TM 5-2420-231-23-2
0138
CLEANING AND INSPECTION
0138
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0138
1. Install new gasket (Figure 2, Item 11), fuel sending unit (Figure 2, Item 10), and five screws (Figure 2, Item 7)
on fuel tank (Figure 2, Item 12).
NOTE
Install wires as tagged and marked during removal.
2. Connect two wires (Figure 2, Items 9 and 14) and install new locknuts (Figure 2, Items 8 and 13) on fuel send-
ing unit (Figure 2, Item 10).
3. Install cap (Figure 2, Item 4) on nut (Figure 2, Item 8).
4. Install two clamps (Figure 2, Item 3), spacers (Figure 2, Item 1), bolts (Figure 2, Item 2), new lockwashers
(Figure 2, Item 6), and nuts (Figure 2, Item 5) on machine.
5. Install cover (Figure 3, Item 5), two spacers (Figure 3, Items 1 and 9), three clamps (Figure 3, Item 6), washer
(Figure 3, Item 3), bolt (Figure 3, Item 2), new lockwasher (Figure 3, Item 7), and nut (Figure 3, Item 8) on
machine.
6. Install bolt (Figure 3, Item 4) on cover (Figure 3, Item 5).
Figure 3. Fuel Tank Cover.
0138
END OF TASK
