TM 5-2420-231-23-2
0162
INSTALLATION CONTINUED
5. Install shuttle interlock timing relay (Figure 7, Item 6) in relay socket (Figure 7, Item 9).
6. Install hazard relay (Figure 7, Item 5) in relay socket (Figure 7, Item 4).
7. Install five relays (Figure 7, Item 7) in relay sockets (Figure 7, Item 8) on right side of bracket (Figure 7, Item 3).
8. Install eight relays (Figure 7, Item 1) in relay sockets (Figure 7, Item 2) on left side of bracket (Figure 7, Item 3).
Figure 7. Relays.
0162
9. Install front console wiring harness eyelet (Figure 8, Item 8) and nut (Figure 8, Item 6) on 12-V stud
(Figure 8, Item 7).
10. Install front console wiring harness eyelet (Figure 8, Item 4) and nut (Figure 8, Item 2) on 24-V stud
(Figure 8, Item 3).
11. Position two rubber boots (Figure 8, Items 1 and 5) over 12-V and 24-V studs (Figure 8, Item 7 and 3).
12. Install ground eyelet (Figure 8, Item 9), ground eyelet (Figure 8, Item 10), and bolt (Figure 8, Item 11) on cab.
13. Connect front console wiring harness connector (Figure 8, Item 14) to main chassis wiring harness connector
(Figure 8, Item 12) and tighten bolt (Figure 8, Item 13).