6
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
BRAKE PRESSURE SWITCH AND FITTING REPLACEMENT
0169
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool Kit, General Mechanic's
0
0
(WP 0376, Item 117)
WP 0369
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
WP 0370
0
0
WP 0374 (Group Number 0308)
Materials/Parts
0
Cap Set, Protective, Dust and Moisture
Equipment Conditions
0
(WP 0375, Item 4)
Machine parked (TM 5-2420-231-10)
0
Rag, Wiping (WP 0375, Item 25)
Batteries disconnected (WP 0157)
0
0
Sealing Compound (WP 0375, Item 31)
0
Estimated Time to Complete
Tag, Marker (WP 0375, Item 33)
0
1.0 hr
O-ring (2)
0
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark wires and lines to aid in installation.
0169-1