TM 5-2420-231-23-2
0175
REMOVAL CONTINUED
NOTE
Tag and mark wires to aid in installation.
3. Disconnect connector (Figure 2, Item 1) from light control switch (Figure 2, Item 2).
4. Remove three screws (Figure 2, Item 8) and knobs (Figure 2, Item 7), and washers (Figure 2, Item 6) from light
control switch (Figure 2, Item 2).
5. Remove four screws (Figure 2, Item 5), washers (Figure 2, Item 4), and light control switch (Figure 2, Item 2)
from bracket (Figure 2, Item 3).
6. Remove two bolts (Figure 2, Item 9), washers (Figure 2, Item 10), bracket (Figure 2, Item 3), and backing plate
(Figure 2, Item 12) from front console (Figure 2, Item 11).
Figure 2. Light Control Switch.
0175
END OF TASK
CLEANING AND INSPECTION
0175
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
