TM 5-2420-231-23-2
0220
CHECK REAR DRIVE AXLE HOUSING OIL CONTINUED
NOTE
The procedure for wheel end oil level check is identical for left-hand and right-hand. Left-
hand wheel end oil level check is shown in this procedure.
3. Operate machine so that rear axle wheel end "oil level" plug (Figure 2, Item 2) is at the 3 o'clock position
(TM 5-2420-231-10).
4. Remove "oil level" plug (Figure 2, Item 2) and O-ring (Figure 2, Item 3) from wheel end (Figure 2, Item 1). Fluid
level should be at the bottom of the hole. Discard O-ring. Add fluid as necessary.
5. Install new O-ring (Figure 2, Item 3) and "oil level" plug (Figure 2, Item 2) on wheel end (Figure 2, Item 1).
6. Repeat steps 3 through 5 for right-hand wheel end oil level check.
Figure 2. Wheel End.
0220
END OF TASK
