TM 5-2420-231-23-3
0239
REMOVAL CONTINUED
3. Disconnect hydraulic hose (Figure 2, Item 1) from stabilizer load check valve (Figure 2, Item 11).
4. Disconnect hydraulic hose (Figure 2, Item 16) from stabilizer load check valve (Figure 2, Item 11).
5. Disconnect stabilizer cylinder pressure switch connector (Figure 2, Item 15) from wiring harness
(Figure 2, Item 5).
6. Disconnect two hydraulic hoses (Figure 2, Items 9 and 10) from stabilizer load check valve (Figure 2, Item 11).
7. Remove nut (Figure 2, Item 6), lockwasher (Figure 2, Item 7), bolt (Figure 2, Item 2), washer (Figure 2, Item 4)
and spacer (Figure 2, Item 3) from machine. Discard lockwasher.
8. Remove two nuts (Figure 2, Item 8), lockwashers (Figure 2, Item 12), bolts (Figure 2, Item 13), and stabilizer
load check valve (Figure 2, Item 11) from bracket (Figure 2, Item 14). Discard lockwashers.
9. Remove stabilizer load check valve (Figure 2, Item 11) from machine.
10. Complete steps 1 through 9 on left side.
Figure 2. Stabilizer Load Check Valve.
0239
