TM 5-2420-231-23-3
0249
CLEANING AND INSPECTION
0249
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0249
NOTE
Install hydraulic hoses as tagged and marked during removal.
Remove plugs and caps from hoses and fittings.
1. Position four left pilot control joystick hydraulic hoses (Figure 6, Item 1) on machine.
2. Connect four left pilot control joystick hydraulic hoses (Figure 6, Item 1) to pilot control valve (Figure 6, Item 2).
3. Position four right pilot control joystick hydraulic hoses (Figure 6, Item 3) on machine.
4. Connect four right pilot control joystick hydraulic hoses (Figure 6, Item 3) to pilot control valve
(Figure 6, Item 2).
Figure 6. Pilot Control Valve.
0249
5. Position two left pilot control joystick hydraulic hoses (Figure 7, Item 3) on machine.
6. Connect two left pilot control joystick hydraulic hoses (Figure 7, Item 3) to backhoe control valve
(Figure 7, Item 1).
7. Position two right pilot control joystick hydraulic hoses (Figure 7, Item 2) on machine.
8. Connect two right pilot control joystick hydraulic hoses (Figure 7, Item 2) to backhoe control valve
(Figure 7, Item 1).
