6
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
BACKHOE STABILIZER CYLINDER REPLACEMENT
0272
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic's
Tag, Marker (WP 0375, Item 33)
0
0
(WP 0376, Item 117)
O-ring (4)
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
Personnel Required
Pliers, Retaining Ring, Fixed Tip, Convertible,
0
Two
90/.090" Tips, 8-3/4" (WP 0376, Item 61)
0
Sling, Eye (Nylon, 4 ft x 1 in.)
References
0
(WP 0376, Item 79)
0
Lifting Device (500-lb capacity)
0
WP 0374 (Group Number 0708 and 0739)
0
Materials/Parts
Equipment Conditions
Cap Set, Protective, Dust and Moisture
0
Backhoe stabilizers lowered to ground
0
(WP 0375, Item 4)
(TM 5-2420-231-10)
Grease, Automotive and Artillery (GAA)
0
Estimated Time to Complete
(WP 0375, Item 14)
Rag, Wiping (WP 0375, Item 25)
1.2 hr
0
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0272-1