TM 5-2420-231-23-3
0272
REMOVAL CONTINUED
9. Remove two retaining rings (Figure 1, Item 14) and pin (Figure 1, Item 13) from stabilizer cylinder
(Figure 1, Item 1).
10. Using lifting device, remove stabilizer cylinder (Figure 1, Item 1) from machine and lower onto a flat surface.
11. Remove sling and lifting device from stabilizer cylinder (Figure 1, Item 1).
Figure 1. Stabilizer Cylinder.
0272
12. Repeat steps 2 through 11 for left-hand stabilizer cylinder.
END OF TASK
CLEANING AND INSPECTION
0272
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK