TM 5-2420-231-23-3
0275
REMOVAL
0275
1. Use hydraulic bottle-type jack (Figure 1, Item 4) and slightly raise backhoe boom and use trestle (Figure 1,
Item 6) to support backhoe boom (Figure 1, Item 1).
2. Remove three locknuts (Figure 1, Item 3) and clamps (Figure 1, Item 2) from tube (Figure 1, Item 5). Position
tube aside. Discard locknuts.
Figure 1. Boom on Support.
0275
3. Remove four locknuts (Figure 2, Item 4), five clamps (Figure 2, Item 5), plate (Figure 2, Item 3) and two tubes
(Figure 2, Item 2) from support backhoe boom (Figure 2, Item 1). Position tubes aside. Discard locknuts.
Figure 2. Boom on Support, Right Side.
0275