TM 5-2420-231-23-3
0286
REMOVAL CONTINUED
28. Remove locknut (Figure 9, Item 11), washer (Figure 9, Item 10), and bolt (Figure 9, Item 9), and set two clamps
(Figure 9, Item 7) and hoses (Figure 9, Item 8) aside. Discard locknut.
29. Disconnect harness connector (Figure 9, Item 5) from backup alarm harness connector (Figure 9, Item 6).
30. Remove two bolts (Figure 9, Item 2) and backup alarm (Figure 9, Item 4) from backhoe control tower bracket
(Figure 9, Item 3).
31. Remove nut (Figure 9, Item 15), lockwasher (Figure 9, Item 14), bolt (Figure 9, Item 13), and clamp (Figure 9,
Item 1) from backhoe control tower bracket (Figure 9, Item 16), and set hose (Figure 9, Item 12) aside. Discard
lockwasher.
Figure 9. Backup Alarm.
0286