TM 5-3805-255-14
0049
DISASSEMBLY
00049
1. Remove four bolts (Figure 2, Item 6), nuts (Figure 2, Item 5), and spider and bearing assembly (Figure 2,
Item 4) from yoke (Figure 2, Item 2) of propeller shaft (Figure 2, Item 1).
2. Bearing caps (Figure 2, Item 3) may stick in grooves in yoke. Carefully tap them at an angle to remove.
Figure 2. Propeller Shaft Disassembly.
0049
3. Mark slip yoke (Figure 3, Item 5) and splined shaft (Figure 3, Item 2).
4. Unscrew dust cap (Figure 3, Item 1) and slide it back on splined shaft (Figure 3, Item 2).
5. Remove slip yoke (Figure 3, Item 5), two packing retainer washers (Figure 3, Item 3), and packing (Figure 3,
Item 4). Discard packing.
Figure 3. Propeller Shaft Disassembly.
0049
END OF TASK
0049-3
