TM 5-3805-255-14
0102
ASSEMBLY CONTINUED
23. Install new gasket (Figure 36, Item 4) and shims (Figure 36, Item 3) in converter housing (Figure 36, Item 5).
24. Install six bolts (Figure 36, Item 1) and new lockwashers (Figure 36, Item 2) and torque bolts to 26-32 lb-ft (3 to
43 Nm).
Figure 36. Shim Pack and Bearing Retainer Installation.
0102
25. Place output yoke (Figure 37, Item 3) over splines of output shaft. Install retaining washer (Figure 37, Item 2)
and new lockplate (Figure 37, Item 4) on output shaft and secure with three bolts (Figure 37, Item 1).
26. Torque three bolts (Figure 37, Item 1) to 26 to 32 lb-ft (35 to 43 Nm). Bend up tabs of lockplate (Figure 37, Item
4) to prevent bolts from loosening.
Figure 37. Output Yoke Installation.
0102
0102-23