TM 5-3805-255-14
0102
ASSEMBLY CONTINUED
14. Install new seal ring (Figure 31, Item 2) in groove in output shaft (Figure 31, Item 1). Coat seal ring with grease.
Figure 31. Output Shaft Installation Preparation.
0102
15. Invert housing (Figure 32, Item 1) and install output shaft (Figure 32, Item 2) in converter housing.
CAUTION
Extreme care must be exercised to prevent breaking seal ring on shaft
16. Install bearing (Figure 32, Item 3) and output shaft (Figure 32, Item 2) in housing (Figure 32, Item 1).
Figure 32. Output Shaft Installation.
0102
0102-20