TM 5-3805-255-14
0104
ASSEMBLY CONTINUED
8. Place shaft (Figure 23, Item 1) in vertical position with reverse oil supply plug facing down. Install new hook-
type seal ring (Figure 23, Item 2) in groove on shaft.
Figure 23. Shaft Seal Ring Installation.
0104
9. Install new rectangular seal ring (Figure 24, Item 1) on clutch piston outer diameter (Figure 24, Item 3). Coat
seal ring on shaft and accelerating piston and inner bore of clutch piston with grease or clean transmission
fluid.
10. Install clutch piston (Figure 24, Item 3) on shaft assembly (Figure 24, Item 2). Be careful not to damage hook-
type seal rings (Figure 24, Item 4).
Figure 24. Clutch Piston Installation.
0104
0104-13