TM 5-3805-255-14
0104
ASSEMBLY CONTINUED
16. Invert shaft assembly. Depress clutch piston (Figure 27, Item 1) into piston housing (Figure 27, Item 3).
Remove snap ring groove filler tool. Install new snap ring (Figure 27, Item 2).
Figure 27. Snap Ring Installation.
0104
NOTE
DO NOT exceed 100 psi (689 kPa) air pressure.
17. Apply regulated shop air pressure (maximum 100 psi) to oil port holes (Figure 28, Item 1) to check operation of
clutches. Clutch piston (Figure 28, Item 2) and piston housing assembly (Figure 28, Item 3) should move
freely.
Figure 28. Air Check.
0104
0104-15