TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
REAR DRIVE SHAFT
REMOVE REAR DRIVE SHAFT
3253-D-11
1. Remove bolts (1) and straps (3) that hold drive
shaft (2) to the yokes. Remove drive shaft (2)
from the machine.
INSTALL REAR DRIVE SHAFT
3253-D-12
NOTE: Make sure all drive shaft yokes are on
the same center line as shown on the illustra-
tion below.
1. Put drive shaft(l) in position. Install the straps
and bolts to hold drive shaft (1) to the yokes.
Tighten bolts to a torque of 55 + 15 N-m (41 +
11 lb.ft).
5-196
