TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
FRONT AND REAR DIFFERENTIALS
7. Use tooling (D) to push pinion shaft (6) out of
housing (2).
8. Remove bearing cone (7) from pinion shaft (6).
9. Remove bearing cone (8) from housing (2).
10.
11.
12.
13.
14.
If necessary, remove bearing cup (9) from
housing (2).
Remove O-ring seal (11) from housing (2).
If necessary, remove bearing cup (10) from
housing (2).
Remove locks (12) from bearing caps (13) and
(14).
Remove the bolts and bearing caps (13) and
(14) from the carrier assembly.
5-200
