POWER TRAINTM 5-3805-258-24-2DISASSEMBLY AND ASSEMBLYFRONT AND REAR DIFFERENTIALSASSEMBLE FRONT AND REARDIFFERENTIALS3258-16Tools Needed A B C D E1P2420 Repair Stand1FT957Adapter1FT996Positioning Group 15P9736 Link Bracket21P520Driver Group18S2328 Dial TestIndicator Group16V4070 Spanner Wrench11. Heat the bearing to a maximum temperature of1350 C (2750 F). Install bearing cone (1) onthe differential case as shown.2. Install two 5/8”-18 NF guide pins in the bevelgear as shown. Fasten a hoist to case (2). Putcase (2) in position in bevel gear ( 3). Install thebolts that hold it. Tighten the bolts to a torqueof 135 +15 N-m (100 + 11 lb. ft.). Install thelockwire on the bolts.3. Install washer (5) and gear (4) in the case.4. Install gears (7) and washers (6) on spider (8).5-203
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business