POWER TRAINTM 5-3805-258-24-2DISASSEMBLY AND ASSEMBLY10.11.FRONT AND REAR DIFFERENTIALSInstall the larger bearing cap (16) on carrierassembly (13). Make sure the threads in thebearing cap and carrier assembly are in align-ment before the bolts are tightened to 475 ± 50N-m (350 ± 37 lb.ft).Install adjustment nut (15) and bearing cup(14) as shown.13.14.15.12. Fasten a hoist to differential (17) with tooling(B). Put differential (17) in position in thecarrier assembly as shown.16.Install smaller bearing cap (19) on the carrierassembly. Make sure the threads in cap (19)and the carrier assembly are in alignment be-fore the bolts are tightened to 475 ± 50 N-m(350 ± 37 lb.ft).Install the bearing cup and adjustment nut(18).Install inner bearing cup (20), outer bearingcup in pinion housing (21) using tool group C.Install O-ring seal (22) on housing (21) and putclean oil on it.5-205
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business