TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
PILOT AND HYDRAULIC PUMP
8. Remove plate (20), O-ring seal (19) and rotor
assembly (18) from ring (17).
9. Remove plate (14) and dowels (16) from ring
(17).
10. Remove O-ring seal (15) from plate (14).
11. Remove vanes (21) from rotor assembly (18).
12. Remove bolts (22) and make a separation of
cartridge assembly (23) from the cover group.
NOTE: Make a note of the direction of the arrows at
locations (X) and (Y) and the location of bolts (24)
for assembly purposes.
13. Remove cartridge (25) and O-ring seal (26)
from body (27).
5-397
